Our Promise

Quick order processing

Orders are typically prepared within 24 hours.

Free Shipping

On eligible orders in the contiguous U.S. and Washington, D.C.

Secure Checkout

Payments are processed through secure checkout services.

30-day money-back

Try it at home. If it is not right for you, request a return under our return policy.

WY-T1 SoftPulse EMS Foot Stimulator - Magnetic remote controller and dual stimulation pads

What’s Included

  • SoftPulse Foot Stimulator ×1
  • Remote Control ×1
  • USB-C Charging Cable ×1
  • User Manual ×1

Specifications

Model Number
WY-T1
Dimensions
12.99 × 12.99 × 1.18 in (330 × 330 × 30 mm)
Weight
1.62 lb (0.735 kg)
Modes
10 preset modes + Cycle Mode
Intensity Levels
20
Auto Shut-Off
15 minutes
Charging Type
USB-C
Charging Time
0.5~1 hours
Battery Life
3.5~4 hours

FAQ

Please read our FAQs page to find out more.

1. Do I need to use SoftPulse with bare feet?

Yes. Place both bare feet directly on the conductive foot areas so the electrical pulses can be delivered properly. Socks or footwear may reduce or block the stimulation.

2. Why is the remote control not responding?

The remote works only after the magnetic controller has been securely attached and the main unit has been turned on. Press and hold the power button on the controller for approximately two seconds before using the remote.

3. How do I select a comfortable intensity level?

SoftPulse starts at Level 1 each time it is turned on. Use the plus and minus buttons to increase or decrease the intensity gradually. Choose a level that feels noticeable but remains comfortable.

4. How long should each session last?

Use SoftPulse for approximately 15 minutes per session. For first-time users, begin at the lowest intensity and allow your feet to adjust before increasing the setting.

5. What should I check if I cannot feel the stimulation?

Make sure the magnetic controller is fully connected, both feet are placed flat on the conductive areas, and the intensity has been increased gradually. Very dry skin or incomplete foot contact may make the sensation less noticeable.

6. How do I charge and clean SoftPulse?

Remove the magnetic controller and connect it to a Type-C charging cable. A flashing red light indicates charging, while a steady green light indicates a full charge. Before cleaning, turn the device off and wipe the foot areas with a soft, slightly damp cloth. Keep the charging contacts completely dry and do not charge the device while it is wet.