SpineEase Lumbar Traction Massager
SpineEase at a Glance
- Three dynamic traction patterns plus six manual height settings from 10 to 60 mm
- Three TENS modes with 9 intensity levels for adjustable electrical stimulation
- Three vibration levels and three heat settings: 104°F, 113°F, and 122°F
- 660 nm red light and 850 nm infrared light operate together while the device is on
- A 10-minute smart timer keeps each powered routine short and defined
Subscribe and get an extra $10 off your first order.
SpineEase
Our Promise
A More Active Reclined Routine
SpineEase brings adjustable lifting, TENS stimulation, vibration, warmth, and dual-wavelength light into one reclined setup. Instead of relying on a single sensation, you can tune the routine across support, stimulation, movement, temperature, and light while remaining in one position.
Five Functions, One Integrated Routine
Dynamic traction changes the support beneath the lumbar area. TENS adds adjustable electrical stimulation, vibration adds rhythmic movement, three heat levels provide controllable warmth, and 660 nm red / 850 nm infrared light runs alongside the routine. Traction, TENS, vibration, and heat are adjustable from the handheld controller, while the dual-wavelength light system activates with the device.
Dynamic Traction
Adjustable TENS
Heat, Vibration & Light
Choose among three traction patterns: multidirectional, vertical, or horizontal. Manual height control provides six steps from 10 to 60 mm, so the lift can be adjusted without changing your reclined position.
Three TENS modes and 9 intensity levels let you adjust electrical stimulation from low to high. Start at a low setting and increase only to a comfortable level while the contact areas remain snug against the skin.
Select one of three vibration levels and one of three heat settings: 104°F, 113°F, or 122°F (40°C, 45°C, or 50°C). When the device is on, 660 nm red and 850 nm infrared light operate together.
Designed for Controlled Adjustment
SpineEase keeps the main settings on the handheld controller and adds a reinforcement board for softer surfaces, so setup and adjustments stay straightforward.
Six-Level Height Control
Manual height adjustment moves through six steps from 0.39 to 2.36 in (10 to 60 mm), giving you a defined range instead of one fixed lift.
Reinforcement Board for Softer Surfaces
Use the reinforcement board beneath SpineEase on a soft bed or sofa to reduce sinking. It is not needed on a hard floor or firm bed.
Controller Within Reach
The handheld controller brings traction mode, height, TENS mode and intensity, vibration, heat, and power controls together in one place.
What’s Included
- SpineEase Lumbar Traction Massager ×1
- Remote Control ×1
- Support Board ×1
- USB-C Charging Cable ×1
- User Manual ×1
Specifications
- Model Number
- PH-M108
- Dimensions
- 16.14 × 7.87 × 2.83 in (410 × 200 × 72 mm)
- Weight
- 3.66 lb (1.66 kg)
- Traction Modes
- 3 · Multidirectional · Vertical · Horizontal
- Traction Height
- 6 levels · 0.39–2.36 in (10–60 mm)
- TENS
- 3 modes · 9 intensity levels
- Heat Settings
- 3 levels · 104°F · 113°F · 122°F (40°C · 45°C · 50°C)
- Light Wavelengths
- 660 nm red + 850 nm near-infrared
- Auto Shut-Off
- 10 minutes
- Charging Type
- USB-C
- Charging Time
- Approx. 1.5–2 hours
- Battery Life
- Approx. 2.5–3 hours
FAQ
Please read our FAQs page to find out more.
1. What do the three traction modes change?
AUTO1 combines vertical and horizontal traction, AUTO2 uses vertical traction, and AUTO3 uses horizontal traction. Short-press AUTO to cycle through the three patterns or turn traction off.
2. How many TENS settings are available?
SpineEase has three TENS modes and 9 intensity levels. Start at a low intensity and increase gradually only to a level that feels comfortable.
3. What are the heat and vibration settings?
Vibration has three levels. Heat has three settings: 104°F / 40°C, 113°F / 45°C, and 122°F / 50°C.
4. How high can the traction lift?
Manual height adjustment has six settings: 10, 20, 30, 40, 50, and 60 mm, equivalent to approximately 0.39 to 2.36 inches.
5. When should I use the reinforcement board?
Use the reinforcement board beneath SpineEase on softer surfaces such as a soft bed or sofa to reduce sinking. It is not necessary on hard surfaces such as a floor or firm bed.
6. How long does one powered session run?
SpineEase switches off automatically after 10 minutes. The manual recommends no more than three uses per day, with at least 30 minutes between sessions.